HEMPEL'S SHOPPRIMER ZS 15890
BASE：15899
HEMPEL'S LIQUID：99751

Description:
HEMPEL’S SHOPPRIMER ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer,designed for automatic spray application. Especially suited, where welding (MIG/MAG) and gas-cutting properties are of importance.

Recommended use:
For short to medium-term protection of abrasive blast cleaned steel plates and other structural steel during the storage, fabrication, and construction periods.

Certificates/Approvals:
Approved as a welding primer by Lloyd's Register of Shipping.
Approved as a welding primer by Det Norske Veritas
Approved as a welding primer by Germanischer Lloyd.
Approved as a welding primer by Bureau Veritas.
Complying with IMO MSC.215(82) as shop primer for ballast tank coating systems. Certified by major
classification societies. Contact your local Hempel representative for more info and specific certificates.

Availability:
Part of Group Assortment. Local availability subject to confirmation.

PHYSICAL CONSTANTS:
Shade nos/Colours：19890* / Reddish grey
Finish：Flat
Volume solids, %：28 ± 1
Theoretical spreading rate：18.7 m2/l [749.9 sq.ft./US gallon] to 15 micron/0.6mils
Flash point：22 °C [71.6 °F]
Specific gravity：1.3 kg/litre [11.1 lbs/US gallon]
Dry to handle：4 to 5 minute(s) 20°C/68°F
Fully cured：72 approx. hour(s) 20°C/68°F (75% RH)
VOC content：620 g/l [5.2 lbs/US gallon] (According to EPA Fed Ref Method 24)
Shelf life：1 year (25°C/77°F) from time of production.
                Shelf life is dependent on storage temperature. Shelf life is reduced at storage temperatures above
                25°C/77°F. Do not store above 40°C/104°F or below 5°C/40°F.
                Shelf life is exceeded if the liquid is gelled or if the mixed product forms gels before application.
                *other shades according to assortment list.
                The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.

APPLICATION DETAILS:
Version, mixed product：15890
Mixing ratio：BASE 15899: HEMPEL'S LIQUID 99751
                    2 : 3 by volume
Application method：Airless spray / Air spray / Brush (touch up)
Thinner (max.vol.)：08570 or 08700 (30%) / 08700 (30%) / 08570 or 08700 (15%)
                              According to separate APPLICATION INSTRUCTIONS
Pot life：24 hour(s) 20°C/68°F (Closed container, constant stirring) see REMARKS overleaf
Nozzle orifice：0.019 to 0.023 "
Nozzle pressure：80 bar [1160 psi]
                           (Airless spray data are indicative and subject to adjustment)
Cleaning of tools：HEMPEL'S THINNER 08700 or 08570.
Indicated film thickness, dry：15 micron [0.6 mils] see REMARKS overleaf
Indicated film thickness, wet：Not relevant
Overcoat interval, min：According to separate APPLICATION INSTRUCTIONS
Overcoat interval, max：According to separate APPLICATION INSTRUCTIONS
Safety：Handle with care. Before and during use, observe all safety labels on packaging and paint containers,consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.

返回